升级方法：
JYS-P5148 Pro Controller Upgrade Method

1，在PC端运行升级包

Run the upgrade package on the PC.



2，按住手柄的[三角形△]动作按钮不放，用包装内配备的数据线，将手柄连接到PC端的USB口

Press and hold the [Triangle △] action button on the controller, and connect the controller to the USB port on the PC using the data cable included in the package.




3，手柄成功接入电脑之后，升级工具会有[Update]的按钮高亮

After the controller is successfully connected to the computer, the [Update] button in the upgrade tool will be highlighted.




4，点击[Update]按钮，升级工具为手柄升级，完成升级，显示【PASS】

Click the [Update] button, and the upgrade tool will upgrade the controller. 
Once the upgrade is complete, [PASS] will be displayed.


当以上升级后，手柄指示灯闪烁，提示需要校准，请继续执行下面的校准操作
After the above upgrade, the controller indicator light will flash, indicating 
that calibration is required. Please continue with the following calibration steps.

1，校准手柄，拔掉数据线，按住手柄的【Creat】和【Option】键不放，重新将手柄和PC电脑连接
To calibrate the controller, unplug the data cable, press and hold the [Create] and [Option] buttons 
on the controller, and reconnect the controller to the PC.

2，同时按扳机[L2键+R2键】3次
Press the L2 and R2 triggers 3 times simultaneously.

3，然后摇[左3D+右3D】各3圈
Rotate the left joystick and right joystick 3 full circles each.

4，最后长按X键1秒确认，通道灯常亮，校准成功
Press and hold the X button for 1 second to confirm (indicator will staylit when successful).






